Testo物料水份測定儀：用途廣泛，高度精確，值得信賴

There can be many different causes for moisture in buildings or timber. The most common of these are rainwater ingress, unprofessionally installed drainage, pipe ruptures or incorrectly stored wood which has been further processed with the wrong moisture for installation. A Testo material moisture meter enables you to determine the material moisture quickly and simply. It works even better if you bear in mind the following tips: 

1. Avoid measurement errors:
   With material moisture measurement, it is important that your own body heat and above all warm breath do not flow onto the probe. A remedy for this is moving the probe around – not too vigorously, but also not too slowly. This allows the probe to adjust to the right temperature and to detect the material moisture accurately.
2. Assess material moisture:
   When you assess material moisture for the first time, you should bear these four factors in mind: 1. Production of humidity in the room. 2. Air exchange with the outside air, as well as its temperature and degree of humidity. 3. Ability of walls and furnishings to absorb humidity. And 4. Transport of humidity by external building components.
3. Prevent mould formation:
   If surfaces are too wet, mould will form sooner or later. The surface moisture function of the Testo thermal imagers enable you to detect the areas susceptible to mould at an early stage and to take the appropriate measures.
4. Measuring accuracy:
   All air and air conditioning technology is governed by standards and directives which are uniform all over Europe. This means an accuracy of ± 15% is stipulated for humidity measurement when commissioning air technology systems. Make sure you use a high-precision material moisture meter for the measurement in order to obtain standard-compliant measurement results. With Testo you are always on the safe side.