-
Replacement Battery - 3.6V Battery
Order-Nr. 0515 0177
$ 67.00excl. tax- Lithium mignon battery (AA)
-
Adhesive tape i.e. for polished surfaces (roll, 33ft. long, ... - Emission adhesive tape
Order-Nr. 0554 0051
$ 130.00excl. tax- Tape for measurements on reflective surfaces
- Temperature-resistant up to +250 °C
-
Battery for testo 176 -1 x TL-5903 AA cell
Order-Nr. 0515 1760
$ 50.00excl. tax- 1 lithium mignon battery (AA)
-
Button cell batteries, Type LR 44, 1.5 Volt (4 off)
Order-Nr. 0515 0032
$ 13.00excl. tax- 4 button cell batteries (LR44)
-
Battery for testo 175 - Application range below -10 °C, Ener...
Order-Nr. 0515 0042
$ 25.00excl. tax- Batteries for temperatures below -10 °C
- Less frequent battery replacement: minimum self-discharge and long battery life due to lithium content
-
Spare pH probe for testo 205 with gel storage cap
Order-Nr. 0650 2051
- Spare pH probe for pH/temperature measuring instrument
- Easy change of measuring tip
-
Spare pH probe pH2 for testo 206 incl. gel storage cap
Order-Nr. 0650 2062
- Spare pH probe pH2 for pH/temperature measuring instrument
- Easy change of measuring tip
-
Spare pH probe for testo 206 incl. gel storage cap
Order-Nr. 0650 2061
- Spare pH probe pH1 for pH/temperature measuring instrument
- Easy change of measuring tip
-
-
Connection hose, 16.4 ft, load up to 281 inH₂O - silicone
Order-Nr. 0554 0440
- For the connection of Pitot tube and pressure probe
- Length of 5 m
-
Spare particle filter, pack of 20 - Spare particle filter, pack of 20
Order-Nr. 0554 3381
- Reliable protection against dirt particles
- 20 off
-
Battery small
Order-Nr. 0515 1900
- Small format for space-saving use
- Can be used at temperatures between -20 and +140 °C
-
Battery large
Order-Nr. 0515 1901
- Ideal for measurements at low temperatures, e.g. freeze-drying
- Can be used at temperatures between -50 and +140 °C
-
Freeze-drying probe holder (puck) - Lyophilization probe holder
Order-Nr. 0554 1907
- Probe holder for precise measurement of the surface temperature (plate temperature)
- Enables direct contact with the surface – the ambient air has no influence on the measurement result
-
Retaining clamp (10 off)
Order-Nr. 0554 0297
- Easy and safe securing of the data logger
- Reusable multiple times
-
Can and bottle bushing
Order-Nr. 0554 0458
- Innovative: fitted by directly screwing it on manually
- Easy attachment of the data logger on cans and bottles
-
Can stand for temperature data loggers - Stand
Order-Nr. 0554 1906
- Stable can stand prevents the data logger from falling over
- Fast fitting thanks to screw-in thread
-
-
CO replacement filter, 1 off
Order-Nr. 0554 4100
- Exchangeable probe for CO sensor
- Blocks cross sensitivity to NO and SO2
-
Spare particle filter for flue gas analyzer (10/pkg) - Spare particle filter for flue gas analyzer
Order-Nr. 0554 3371
- Reliable protection against dirt particles
- 10 off
-
Spare sintered filters (2 off)
Order-Nr. 0554 3372
- For replacing the probe pre-filter
- Ideal for measuring flue gases with a high dust content
-
NO replacement filter, 1 off
Order-Nr. 0554 4150
- Exchangeable probe for NO sensor
- Blocks cross sensitivity to SO2
64 results found