Norway
Details Technical Data Accessories Applications Downloads
  1. Home
  2. testo 380

testo 380 - Particulate matter measurement system

Order-Nr.  0632 3801

  • testo 380 Feinstaub-Messsystem
  • testo 380 - Feinstaub-Sonde
  • testo 380
  • testo 380
Buy now

  • The system comprises testo 380 particulate matter measuring instrument and testo 330-2 LL flue gas analyzer

  • Complete solution for solid fuel, oil and gas systems 

  • Fully TÜV-tested for limit value levels 1/2 and according to VDI 4206 Sheet 2

  • Particulate matter measurement, simultaneous O2 and CO measurement

With the testo 380 particulate matter measurement system, you can carry out uncomplicated particulate matter measurements directly on site. The completely new method of measurement developed by Testo enables the particulate matter to be monitored and limit values to be enforced. The measurement system is your professional tool for solid fuel, oil and gas systems.

Details

Product Description

The constantly rising number of solid fuel systems is leading to a further increase in the emission of particulate matter. The revised version of the 1st German Federal Immission Control Ordinance (BImSchV) presents new challenges for flue gas inspectors, heating engineers and service engineers when it comes to particulate matter measurement.

testo 380 particulate matter measurement system – complete solution for solid fuel, oil and gas systems

The testo 380 particulate matter measurement system comprises two system components: the testo 380 particulate matter measuring instrument including particulate matter probe and the testo 330-2 LL as a control centre and flue gas analyzer. This complete system is extremely compact, easy to use and ensures accurate measurements on solid fuel, oil and gas systems.

Advantages of the testo 380 particulate matter measurement system for particulate matter measurement

  • Suitability permit received for fuels 1-8, levels 1 and 2
  • Measurement system comprising testo 380 particulate matter measuring instrument and testo 330 LL flue gas analyzer
  • The testo 380 particulate matter measuring instrument allows you to carry out effortless and straightforward measurements directly on site
  • testo 330 LL flue gas analyzer: System control centre and flue gas analyzer
  • Parallel measurement of particle matter, O2 and CO in real time
  • Charts used to show all required measuring values for an optimum overview
  • Particularly cost-effective operation and maintenance
  • Effortless handling and easy transportation
  • Fully TÜV-tested for limit value levels 1 and 2 and according to VDI 4206 Sheet 2
  • High-tech in a portable case: measurement of all relevant values with just one probe

Delivery Scope

testo 380 particulate matter measurement system incl. testo 380 particulate matter measuring instrument with particulate matter probe and cleaning set, testo 330-2 LL flue gas analyzer with mains unit (incl. Bluetooth, H2-compensated CO cell), modular flue gas probe (length 300 mm, Ø 8 mm), combustion air temperature probe (length 190 mm).

 

Technical Data

General technical data

Weight

7900 g

Measuring range

0 to 300 mg/m³

Accuracy

acc. VDI 4206-2

Resolution

0.1 mg/m³ (>5mg/m³)

Dimensions

475 x 360 x 190 mm

Operating temperature

+5 to +40 °C

Product-/housing material

ABS

Protection class

IP40

Display type

LCD (Liquid Crystal Display)

Display function

shows warm-up phase and operational readiness

Power supply

via internal mains unit: 100 V AC/0.45 A to 240 V AC/0.2 A (50 to 60 Hz)

Maximum memory

500.000 readings

Storage temperature

-20 to +50 °C

Applications

Whether flue gas inspector/chimney sweep, service engineer or heating engineer: testo 380 is the ideal aid.

If particulate matter measurement has never presented any difficulty - it won't take long to learn how this works: the particulate matter measurement system will guide you through the measurement, analyse the relevant particulate matter, O2 and CO values in parallel, and illustrate these in a diagram. Regardless of whether you are carrying out an acceptance test, or would like to set a combustion system to best effect: with the particulate matter analyzer testo 380, the new challenges of particulate matter measurement can be faced with confidence.

Thanks to testo 380, the legal guidelines and regulations regarding the acceptance testing process are easily met: the acceptance test integrated into the measurement menu follows the official process set out by the first German Emission Control Ordinance (BImSchV). The intuitive menu guidance ensures that none of the stipulated steps are missed out: core flow and draught measurement are already integrated into the measurement process; important work stages are constantly prompted.

Your challenging task as a service engineer and tradesman in the areas of heating and sanitary facilities is to set solid fuel systems on site to perform efficiently and meet the new limit values. The measurement program “setting assistant” is an excellent aid: it allows you to carry out measurement procedures with ease; in fact, the testo 380 can perform several measuring cycles in a row without any difficulty.

testo 380

Downloads

Product Brochures

Manuals

Software

  • Instruction manual EasyHeat software  (pdf, 3.55 MB)

  • Testo ZIV driver ZIV 2000 for testo 320 and testo 330  (v2.1, 2.22 MB) Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.

  • Testo ZIV driver for testo 300, testo 320 and testo 330  (v2.3, 64.11 MB) The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.

  • testo 380 Box  (V1.17, 1.75 MB)

  • Firmware Update testo 380  (63.98 MB)

Buy now