Certificates

Order-Nr. 0520 0076

• Calibration points: 11.3% and 75.3% relative humidity at +25 °C

Order-Nr. 0520 0153

• Calibration points: -18 °C, 0 °C, +40 °C

Order-Nr. 0520 0246

• Calibration points: 11.3% and 75.3% relative humidity at +25 °C

Order-Nr. 0520 0261

• 3 calibration points: -20 / 0 / +60 °C
• For data loggers and transmitters

Order-Nr. 0520 0490

• 3 calibration points: 0 / +100 / +200 °C
• Calibration of the thermal imager

Order-Nr. 0520 0489

• 3 calibration points: 0 / +25 / +50 °C
• Calibration of the thermal imager

Order-Nr. 0520 0003

• 6 calibration points: O₂: 2.5 vol% / CO: 100 ppm / CO: 1000 ppm / NO: 800 ppm / NO₂: 100 ppm / SO₂: 1000 ppm
• According to ISO standard

Order-Nr. 0520 0001

• 3 calibration points: -18 / 0 / +60 °C
• For air/immersion probes

Order-Nr. 0520 0141

• Calibration points freely selectable in the range -196 to +1200 °C (external probes), -40 to +180 °C (internal probes)
• For data loggers and transmitters

Order-Nr. 0520 0281

• 5 calibration points: -50 / 0 / +90 / +121 / +140 °C
• Internationally recognized according to DAkkS standard and binding in a court of law

Order-Nr. 0520 0171

• 3 calibration points: -8 / 0 / +40 °C
• For surface probes

Order-Nr. 0520 0010

• 5 calibration points: 0 / 500 / 1,000 / 2,000 / 4,000 lx
• According to the ISO standard

Order-Nr. 0520 0006

• 2 calibration points: 11.3 and 75.3 %RH at +25°C
• According to the ISO standard

Order-Nr. 0520 0004

• 4 calibration points: 1 / 2 / 5 / 10 m/s
• For hot wire anemometers, vane anemometers and Pitot tubes

Order-Nr. 0520 0034

• 4 calibration points: 5 / 10 / 15 / 20 m/s
• For hot wire anemometers, vane anemometers and Pitot tubes

Order-Nr. 0520 0071

• According to the ISO standard
• 3 calibration points: +60 / +120 / +180 °C

Order-Nr. 0520 0025

• 5 calibration points distributed over the measuring range
• Accuracy 0.1 to 0.6 % of f.v.

Order-Nr. 0520 0005

• 5 calibration points distributed over the measuring range
• Accuracy > 0.6 % of f.v.

Order-Nr. 0520 0211

• 3 calibration points: -20 / 0 / +60 °C
• For air/immersion probes

Order-Nr. 0520 0111

Order-Nr. 0520 0024

• 4 calibration points: 0.3 / 0.5 / 0.8 / 1.5 m/s
• For hot wire and vane anemometers

Order-Nr. 0520 0002

• 3 calibration points: +60 / +120 / +180 °C
• For infrared measuring instruments/probes

Order-Nr. 0520 0401

• 3 calibration points: -18 / 0 /+ 60 °C
• For infrared measuring instruments/probes

Order-Nr. 0520 0033

• According to the ISO standard
• 3 calibration points: 0 / 1,000 / 5,000 ppm