Cement

Order-Nr. 0632 3510

• Increased measurement range for unlimited measurements even when gas concentrations are higher
• Easy-to-change gas sensors and easy access to wearing parts

Order-Nr. 0632 3340

• Can measure CO, COlow, NO, NO_low, NO₂ or SO₂
• Extended measuring range for use in environments with high gas concentrations

Order-Nr. 0632 3511

• testo 350 Analysis Box just as easy to use when not positioned at measurement site
• Internal memory for receiving measurement data from the Analysis Box

Order-Nr. 0563 0890 X4

• testo 890 professional thermal imager: resolution 640 × 480 pixels, upgradable to 1280 × 960 pixels with SuperResolution technology, thermal sensitivity < 40 mK
• Super-telephoto lens with a 6.6° x 5° field of view for the accurate recording of extremely distant objects

Order-Nr. 0563 0890 X5

• testo 890 professional thermal imager: resolution 640 × 480 pixels, upgradable to 1280 × 960 pixels with SuperResolution technology, thermal sensitivity < 40 mK
• Two lenses included in the kit: super-telephoto lens and an additional lens (standard, 25° or telephoto lens) which you are free to choose

Order-Nr. 0563 0890 X2

• testo 890 professional thermal imager: resolution 640 × 480 pixels, upgradable to 1280 × 960 pixels with SuperResolution technology, thermal sensitivity < 40 mK
• Choice of lens between standard, 25° and telephoto lens – you are free to choose two lenses

Order-Nr. 0563 0890 X3

• testo 890 professional thermal imager: resolution 640 × 480 pixels, upgradable to 1280 × 960 pixels with SuperResolution technology, thermal sensitivity < 40 mK
• Three lenses included in the kit: standard, 25° and telephoto lens

Order-Nr. 0600 8764

• Easy probe shaft replacement via quick-change click system
• NO₂/SO₂ special hose (length: 2.2 m)

Order-Nr. 0618 7220

• For determining Wet Bulb Globe Temperature (WBGT)
• Reliable assessment of workplaces exposed to heat according to ISO 7243 and DIN 33403-3

Order-Nr. 0600 7610

• Can be used in combination with testo 340 and testo 350
• Additional inline filter to protect the gas sampling hose from contamination

Order-Nr. 0600 9766

• Easy probe shaft replacement via quick-change click system
• NO₂/SO₂ special hose (length: 2.2 m)

Order-Nr. 0600 9767

• Easy probe shaft replacement via quick-change click system
• NO₂/SO₂ special hose (length: 2.2 m)

Order-Nr. 0600 8765

• Easy probe shaft replacement via quick-change click system
• NO₂/SO₂ special hose (length: 2.2 m)

Order-Nr. 0600 8767

• Easy probe shaft replacement via quick-change click system
• Preliminary filter offers protection from dusty flue gases

Order-Nr. 0600 7555

• Additional particle filter in the hose provides protection from contamination
• Probe shaft is easy to replace

Order-Nr. 0600 8766

• Easy probe shaft replacement via quick-change click system
• Preliminary filter offers protection from dusty flue gases

Order-Nr. 0600 8898

• Temperature measurement in parallel with the flue gas measurement on industrial engines
• Thermocouple with fast response time

Order-Nr. 0554 3334

• Convenient measurement data management
• Including USB connection cable

Order-Nr. 0600 7630

• Measurements in applications with flue gas temperatures of up to 600 °C
• Short time needed to set up the heated industrial probe (ready for operation in 20 minutes maximum)

Order-Nr. 0600 7556

• Additional particle filter in the hose provides protection from contamination
• Useful for measurements on diesel engines: preliminary filter provides protection from diesel particulates

Order-Nr. 0600 7620

• Additional inline filter protects the gas sampling hose from contamination
• Measurements in applications involving high flue gas temperatures of up to 1 800 °C

Order-Nr. 0554 3336

• Controlling and reading out several measuring instruments on the PC
• Convenient measurement data management

Order-Nr. 0635 8888

Order-Nr. 0635 2042

• For measuring flow velocity
• Ideal for high flow velocities and heavily contaminated flow